Fiber cement, stucco, wood and conversions on 1950s–80s ranch estates on acre lots behind the Bradbury Estates, replaced or repaired by one licensed, insured general contractor, with the dry rot and flashing behind the wall fixed under the same City of Bradbury permit, one fixed written price and a 10-year written workmanship warranty.
Professional, licensed & insuredFixed-price proposalsPermits & reviews handledOur own crew, not subs
Tell us about the house. We call back to schedule the on-site estimate in Bradbury.
Thanks. We will call you to set up the free on-site estimate in Bradbury.
Call now · (818) 210-4544Siding contractor in Bradbury, CA: Right Image Builders (CSLB #1021284, licensed and insured since 2016) replaces and repairs siding and stucco on 1950s–80s ranch estates on acre lots behind the Bradbury Estates and Woodlyn Lane gates, equestrian properties, and 1950s ranch houses on the flats near Royal Oaks Drive across the Royal Oaks flats and the Mount Olive foothill, with the dry rot, sheathing and flashing behind the wall repaired by the same crew on the same City of Bradbury permit.
Fiber cement (James Hardie and similar), three-coat re-stucco and stucco repair, wood and engineered wood, stucco-to-siding conversions; the foothill and canyon parcels north of Royal Oaks Drive are mapped Very High; the flats mostly are not; cladding fastened to the wind schedule for the Santa Ana corridor. Two to four weeks on site for a single-storey house, four to six for two-storey and hillside houses; one fixed written price after a free on-site estimate; 10-year written workmanship warranty. Office in Valley Glen.
Updated October 2026 · Right Image Builders project team · CSLB #1021284 · 5.0★ Google (45 reviews) · 4.9★ Angi (103 reviews)
Bradbury is a few hundred houses on big lots at the foot of the San Gabriels: ranch estates from the 1950s–80s behind the Bradbury Estates and Woodlyn Lane gates, horse properties with barns and guest houses, and 1950s ranch houses on the flats near Royal Oaks Drive. The walls are long and low, wood or stucco, running down to planters and paddocks where the sprinklers hit them every morning, and the barns have to match the house.
The City is small and its process is particular: the building inspector keeps morning counter hours three days a week, plans go to Architectural Design Review before plan check on most exterior work, and the gated communities add their own review. We prepare the design review submittal with samples and elevations, then the permit, and we schedule inspections around the counter days so the job does not wait.
The foothill parcels north of Royal Oaks are a Very High Fire Hazard Severity Zone, where Chapter 7A settles the cladding: fiber cement, stucco or listed fire-retardant-treated wood, with ember-resistant vents. Wind comes down the canyons in the autumn, so the barrier and the fastening schedule matter on the north and east walls.
Almost never in the middle of the wall. Always at an opening, an edge or the base. This is what we open and look at before we price.
A licensed, insured general contractor, not a siding installer: the framing behind the wall, the barrier and flashing, and the cladding, under one permit and one contract.
James Hardie, Allura and similar lap, panel and shingle, in the climate-rated grade for Southern California, factory-finished or painted on site, over a lapped and taped weather-resistive barrier with every opening flashed. Noncombustible, so it is the usual answer in the fire zones.
Get a free estimate
Three-coat stucco over new paper and lath where the old coat has let go, floated and textured to match the house; crack, patch and parapet repair where the field is sound; the weep screed and base flashing replaced where the soil has buried them.
Get a free estimate
Cedar, redwood and engineered wood lap, board-and-batten and shingle, profile-matched to the original on Craftsman and ranch houses; listed fire-retardant-treated wood where the parcel sits in a Very High Fire Hazard Severity Zone.
Get a free estimate
Full tear-off to the sheathing, framing and sheathing repaired, new barrier and flashing, then the new cladding; the conversion is permitted as an alteration and we handle the design-review or HOA submittal where there is one.
Get a free estimate
Because we are a general contractor, the soft sill plate, the rotted sheathing, the missing window head flashing or the deck ledger that was sided over is repaired under the same permit and the same contract, not referred to someone else.
Get a free estimate
In the Very High Fire Hazard Severity Zones the cladding has to be noncombustible or ignition-resistant and the vents ember-resistant; we specify from the State Fire Marshal listings and detail the eaves and trim to match, so the inspection passes the first time.
Get a free estimateProfessional, licensed and insured, and we put that in writing at every step, because re-siding a house is a trust decision before it is a construction decision.
California general contractor license CSLB #1021284 (General Building B), active since 2016, with general liability and workers' compensation insurance. Check the license yourself at cslb.ca.gov before you sign anything, with us or anyone else.
The proposal lists what comes off, what gets repaired, how the wall is flashed, which cladding goes on and which permit and reviews cover it. If it is not written down, it is not in the job.
When the old siding or stucco comes off we photograph the sheathing and framing and send you the pictures. Anything beyond the scope is priced in writing before the crew continues. You never find out from the invoice.
California law caps a home-improvement deposit at $1,000 or 10 percent of the contract, whichever is less. We follow it. Progress payments follow the work, and the final payment comes after your walkthrough.
We prepare the design-review, HOA or Art Jury submittal where the city has one, pull the permit, meet the inspector and close it. You get the closed-permit record a buyer or an insurer will ask for.
The people who inspect the wall are the people who re-clad it. No subcontractor hand-offs, no call center; your project lead answers the phone during the job and after it.
Every wall we re-clad is built the same way from the framing out, to the manufacturer’s written specification and the code for the parcel. Skip a layer and the warranty means nothing.
BeforeAfter
From our Calabasas hillside project: weathered wood siding to painted James Hardie fiber cement, full tear-off, six weeks on the slope. Two photographs from different spots on the hillside; drag the handle.
Bradbury issues its own permits: siding and stucco work goes through the City of Bradbury Building Department at City Hall, 600 Winston Avenue, where the building inspector keeps counter hours on Tuesday to Thursday mornings and plans go to the Planning Department for Architectural Design Review before plan check, not LADBS. A like-for-like re-side or re-stucco is a simpler permit than a conversion or a wall that needs framing repair, which goes to plan check.
Architectural Design Review comes before the building permit on most exterior work in Bradbury; the Bradbury Estates and Woodlyn Lane gates add their own association review, and the foothill parcels north of Royal Oaks are a Very High Fire Hazard Severity Zone.
We prepare whichever review comes first, submit the permit, schedule the inspections, meet the inspector at the flashing stage and at the final, and close the permit before the final payment. You keep the closed-permit record.
Sources, checked October 27, 2026: City of Bradbury, Building and Safety (permits for siding, design review, inspector hours); California Building Code Chapter 7A and the Office of the State Fire Marshal WUI product listings; CAL FIRE Fire Hazard Severity Zone maps (2025 local-responsibility-area update).
Two things decide the material before taste does: whether the parcel is in a Very High Fire Hazard Severity Zone, and how close it is to the ocean. The rest is what is behind the cladding.
Exterior walls have to be noncombustible or ignition-resistant: fiber cement, three-coat stucco, listed fire-retardant-treated wood or an assembly tested to the State Fire Marshal standard, with ember-resistant vents and the eaves and trim detailed to match.
Within reach of the salt air the fasteners, flashing, screed and vents fail before the field does. Manufacturers call for hot-dip galvanized or stainless metal by distance from the water; we specify it for the parcel, not from a catalogue.
We look the parcel up on the CAL FIRE and city maps at the estimate, write the material and the fastening into the scope, prepare any design-review or HOA submittal, and pull the permit that matches. The foothill and canyon parcels north of Royal Oaks Drive are mapped Very High; the flats mostly are not.
Sources: California Building Code Chapter 7A and the Office of the State Fire Marshal WUI product listings; CAL FIRE Fire Hazard Severity Zone maps (2025 update); manufacturer installation guides for coastal fastening; the city and county pages cited above. Checked October 2026. Confirm the zone for your parcel with the city or county.
Honest, straightforward, and clear. The team was so professional, respectful, and clean. Everything was as planned and within the timeline.Zachary R. · Google
The fixed-price contract was exactly what we needed. No surprise invoices, no scope creep. The owner personally showed up to every major milestone.David & Sarah K. · Houzz
Prompt, thorough, and responsive. The price was very fair unlike three other contractors I requested bids from.Sherry C. · Yelp
CSLB #1021284, licensed and insured since 2016. Framing repair, flashing and cladding on one license, one permit, one contract.
One itemized price after the estimate. Hidden conditions photographed and priced in writing before the crew continues.
In the contract, handed over with the closed permit. Manufacturer warranties registered in your name where offered.
At the house in Bradbury, with the base of the wall checked and a test section opened, not a quote from the driveway.
Also serving: Sierra Madre, Pasadena, Altadena, Pacific Palisades, Malibu, Topanga, Calabasas, Hidden Hills, Agoura Hills, Westlake Village, La Cañada Flintridge, Palos Verdes Estates, Rancho Palos Verdes, Rolling Hills, Rolling Hills Estates, Manhattan Beach, Hermosa Beach, Redondo Beach, El Segundo, Stevenson Ranch, South Pasadena, San Marino, La Habra Heights
Siding replacement across Los Angeles, all 48 cities →
Plain answers on fire-zone materials, fiber cement versus wood versus vinyl, stucco versus siding and hiring, written for Los Angeles houses and kept current.
Which claddings qualify, what the vents and eaves have to do, and how the permit checks it.
Read the guide →Decision guideFiber cement, engineered wood and vinyl compared for Los Angeles sun, fire zones and maintenance.
Read the guide →Decision guideWhen the stucco can be saved, when it cannot, and what a conversion involves.
Read the guide →AnswersPermits by city, fire-zone materials, repair versus replacement, what a proposal must include.
Read the answers →On most exterior work, yes: plans go to the Planning Department for Architectural Design Review before the Building Department's plan check, and the Bradbury Estates and Woodlyn Lane associations review material and colour as well. We prepare the submittal with samples and elevations, then pull the permit once it is approved.
The City of Bradbury Building Department at City Hall on Winston Avenue, which lists siding among the work that needs a permit; the inspector keeps counter hours Tuesday to Thursday mornings, so we schedule inspections around them. We pull it, meet the inspections and close it before the final payment.
The foothill and canyon parcels north of Royal Oaks Drive are mapped Very High; the flats mostly are not. We check the parcel on the CAL FIRE map at the estimate. In the zone, Chapter 7A requires noncombustible or ignition-resistant cladding, fiber cement, stucco or listed fire-retardant-treated wood, with ember-resistant vents.
Yes. Right Image Builders, Inc. holds California general contractor license CSLB #1021284 (General Building B), active since 2016, with general liability and workers' compensation insurance. Verify the license at cslb.ca.gov and ask us for the insurance certificates; we expect you to.
Usually whichever the house already has, done properly: a re-stucco over new paper and lath on a stucco house, fiber cement or wood on a sided house, because the look, the trim and the neighbours are already set. A conversion makes sense when the owner wants the other look or the existing wall has to come off anyway. We open a test section at the estimate and recommend from what is behind the wall, not from a catalogue.
Two to four weeks on site for a single-storey house and four to six for a two-storey or hillside house that needs scaffolding on every elevation, after the permit and any design review are in hand. The schedule is written before the first day and the house is kept weather-tight between elevations.
Everything the estimate scoped: tear-off, the repairs we can see, the weather-resistive barrier, flashing, the cladding, trim and finish where scoped, the permit, the inspections and any design-review submittal. Anything uncovered at tear-off is photographed and priced in writing before the crew continues, and the final payment comes after your walkthrough. No surprise invoices.
Fix the wall before the next rain. One licensed, insured crew, one fixed written price, the permit closed, a 10-year written warranty.
