Second Story Additions in Burbank: Stepbacks, the 85% Rule and the Cost
Burbank lets most houses go up to two stories, but it shapes the new floor closely: the upper floor is capped at 85 percent of the first, and it has to step back from the sides and, on many houses, from the front. Here is how those rules play out.
A second story in Burbank costs about $270K–$480K+ in 2026 and is shaped by the city's own rules: the upper floor may be no more than 85 percent of the first floor, it must step back from the sides and, on houses close to the street, from the front, and the house may reach 30 ft with a pitched roof. Plan on 3–5 months of design and Burbank plan check and 4–6 months of construction. A structural engineer confirms first that the house can carry the new floor.
Right Image Builders (CSLB #1021284), a licensed room addition contractor in Burbank, designs to these rules from the first sketch.
The rules that shape a Burbank upper floor
| Rule | Burbank standard | Effect on the design |
|---|---|---|
| Upper-floor size | No more than 85% of the first story's gross floor area | The second floor is always a little smaller than the first |
| Height | 20 ft top plate; 30 ft pitched roof, 23 ft flat roof | A sloped roof gives the most room upstairs |
| Side stepback | 40% of the upper wall set back 4 ft, 30% set back 5 ft, or a 45° daylight plane from 12 ft | Long flat side walls are broken up |
| Front stepback | Required when the first-floor front wall is 35 ft or less from the front lot line; options set by distance | Houses close to the street set the upper floor back |
| Street side (corner lots) | 20% of lot width, at least 6 ft and at most 20 ft, for the second story | Corner houses step back more on the side street |
| Privacy | Screening trees, hedges or fence where the upper floor is within 15 ft of a shared line; balconies 10 ft from interior side lines | Windows and balconies are placed with the neighbors in mind |
| Street facade | At least 20% windows or entry doors on each street-facing facade | No blank walls toward the street |
The front stepback depends on how far the existing first-floor front wall sits from the property line. Beyond 35 ft no extra setback is needed; closer than that, the code offers a 60-degree daylight plane, a uniform 5 ft setback for houses 30–35 ft back, a 10 ft setback for houses 25–30 ft back, or a partial setback combined with a smaller upper floor. These options, in §10-1-603(E) of the Burbank code, are where most of the design choices on a Burbank second story are made.
Up or out in Burbank
With 6,000–7,000 sq ft lots, 50 percent lot coverage and a floor-area allowance that counts every enclosed building, many Burbank owners find that a rear ground-floor room fits and costs less per square foot. Going up wins when the yard is small or already holds a garage, pool or ADU, or when the family wants bedrooms away from the street. On the Spanish and bungalow houses of Magnolia Park, a partial upper floor over the rear wing often keeps the street view of the house almost unchanged.
| Second story | Ground-floor room | |
|---|---|---|
| 2026 range in Burbank | $270K–$480K+ | $65K–$135K bump-out; $135K–$270K room or suite |
| Design and plan check | 3–5 months | 2–4 months |
| Construction | 4–6 months | 3–6 months |
| Lot coverage used | None added | The footprint of the new room |
Hillside lots
In the mapped hillside area a second story usually triggers a Hillside Development Permit, because the roof will exceed 16 ft or the house will pass 3,000 sq ft. Hillside heights are measured from natural grade, capped at 30 ft, and lower near the street, so upper floors on slopes are often stepped down the hill instead of stacked. The Burbank permit guide covers that permit.
Typical upper floors in Burbank
- A partial second floor of about 400–500 sq ft over one wing: a primary suite with a bath, the stair in a former bedroom corner. The lower end of $270K–$480K+.
- A full second floor of 700–1,000 sq ft: two or three bedrooms and a bath, a new roof over the whole house. The middle of the range.
- A full floor with two baths on a sloped or tight lot: more reinforcement, a crane, a harder exterior match. The top of the range.
Each of these is priced after the structural evaluation, because the work below the new floor is the line item that varies most from house to house.
Five decisions to settle before drawings
- What the structural evaluation says. It decides whether the project is practical and what the reinforcement adds to the price.
- Full or partial upper floor. A partial floor over one wing costs less, keeps more of the existing roof and fits the height rules more easily.
- Where the stair goes. It takes ground-floor space, usually a bedroom corner or part of the living room, and drives the plan.
- Whether the roof is replaced. When the old roof cannot be continued cleanly, one new roof over the whole house usually costs less than a patchwork.
- Whether the service is big enough. An upper floor with a bath and its own HVAC zone usually needs a 200-amp Burbank Water and Power service on an older Burbank house.
Settling these first keeps design fees from going into a plan the structure or the lot cannot support.
Making the new floor look original
In Burbank the houses are 1920s–40s Spanish and bungalow homes and later ranch houses, and an upper floor that reads as part of the original house is most of the design work: roof pitch and overhangs carried through, window proportions repeated, stucco or siding texture matched, and the new mass stepped back where the encroachment plane or the neighbors call for it. Where the old roof cannot be continued cleanly, a new roof over the whole house usually costs less than a patchwork and lasts longer.
When a second story is not the right answer
Going up costs more per square foot than building out, and it is not always worth it. If the lot has room for a rear addition inside the setbacks, if the house would need a new foundation along most of its walls to carry a floor, or if the family cannot be away during the roof-off weeks, a ground-floor addition or an ADU may give the same space for less. The build up or build out guide walks through that choice; in Burbank we price both versions when a lot allows either.
The roof question
Most second stories end with a new roof over the whole house, because the old roof is opened, partly removed and loaded with a new floor. That is the moment to choose the roofing for the next thirty years: a Class A material, proper attic ventilation, insulation to current Title 24 levels and, if you want solar, a layout and conduit planned now rather than retrofitted. In Burbank we price the full new roof and the partial-patch option side by side so the choice is clear.
Living through a second-story addition in Burbank
The disruptive stretch is when the old roof comes off and the new floor is framed and dried in. Some families stay with the ground floor protected; many plan to be away for those weeks. The stair needs a footprint downstairs, often a bedroom corner or part of the living room, and placing it well is one of the first design decisions. A new floor also changes the electrical and HVAC load, so the panel and the system are sized for the whole house, not just the new rooms. Neighbors notice a second story more than any other addition, so we share the schedule for the noisy stages, keep deliveries off the street at school times where we can, and leave the site swept every evening.
How we price a room addition in Burbank
One fixed, written price after a free on-site visit: we check the parcel, measure the house, look at the panel, the plumbing and the foundation, and itemize the design, engineering, permits, inspections and construction. Hidden conditions are priced in writing before the crew continues, the final payment follows your walkthrough, and a California home-improvement deposit is capped at $1,000 or 10 percent of the price, whichever is less. To start, see our room addition contractor page for Burbank.
Sources (checked November 2026): Burbank Municipal Code Title 10, Chapter 1, Article 6: R-1 and R-1-H zones (§10-1-601), development standards Table 10-1-603 (floor area, height, setbacks, second-story stepbacks), hillside area and Hillside Development Permit (§§10-1-606, 10-1-607); City of Burbank Community Development Department, Building & Safety Division, 150 N. Third Street; Burbank Fire Department, Fire Hazard Reduction Program (Very High Fire Hazard Severity Zone map, updated March 24, 2025); Right Image Builders service and neighborhood pages (2026 planning ranges, timelines, permit authorities). Cost figures are Right Image Builders' 2026 planning ranges from its service and neighborhood pages.
Read before you hire anyone.
Plain answers on costs, permits, materials and hiring, written for Los Angeles houses and kept current.
How Much Does a Whole-Home Remodel Cost in Los Angeles in 2026?
Whole-home remodel cost in Los Angeles, 2026: per-sq-ft planning ranges with and without structural work, by…
Read the guide →Decision guideWhole-Home Remodel or Tear-Down Rebuild: How to Decide in Los Angeles
Remodel the whole house or tear it down? When the structure is worth keeping, LA floor-area and hillside rules, tax…
Read the guide →Decision guideRemodel or Move? How to Decide in Los Angeles
Remodel or move in Los Angeles (2026)? Prop 13 and 19, transfer taxes and Measure ULA, what an addition or remodel…
Read the guide →AnswersHow to hire a contractor
Direct answers from the Los Angeles remodeling FAQ, kept current.
Read the answers →Frequently Asked
Questions
The upper level is capped at 85 percent of the ground floor's gross area, and both floors together still have to stay inside the lot's overall floor-area allowance.
Two stories, with a 20 ft top plate and an overall 30 ft for a pitched roof or 23 ft for a flat roof, measured from the lower of existing or finished grade.
Yes. The upper floor uses one of three side options: 40 percent of its length set back 4 ft, 30 percent set back 5 ft, or a 45-degree daylight plane from 12 ft. Houses close to the street also step back at the front.
Yes, set back at least 10 ft from the interior side property lines, and screening plants or fencing are required where the upper floor comes within 15 ft of a shared line.
About $270K–$480K+ in 2026, depending on the size of the floor, the strengthening of the house below, upstairs bathrooms and whether the lot is in the hillside area.
Usually three to five months for the structural evaluation, drawings and Burbank plan check, longer with a Hillside Development Permit, then four to six months of construction.
Room Addition Contractor in Burbank
Design, permits and construction, one contract →
GuideRoom Addition Cost in Burbank (2026)
Prices by type and size →
GuideRoom Addition Permits in Burbank
Burbank's own rules →
ServiceSecond-Story Additions
Structure, stairs and roof →
GuideBuild Up or Build Out?
Second story vs. ground-floor addition →
Service HubRoom Addition Contractor in Los Angeles
Every addition type we build →
Find Out How Your House
Can Go Up
Free on-site estimate anywhere in Burbank: we pull your parcel, look at the structure and the yard, and give you a written recommendation and a fixed price before any design work.
(818) 210-4544