Siding Contractor
in Culver City, CA
Done Right, Once.
Fiber cement, stucco, wood and metal on Culver City houses, replaced or repaired by our own crew with the weather barrier and flashing done properly, the permit pulled through the city, and a 10-year workmanship warranty in writing.
Siding Contractor in Culver City, CA: Right Image Builders (CSLB #1021284) replaces and repairs siding and stucco for 1920s–40s bungalows and 1950s ranches on 5,000–6,500 sq ft lots, hillside houses in Blair Hills across Carlson Park, Sunkist Park and Blair Hills, with its own crew and permits through the City of Culver City Building Safety Division. 2–4 weeks on site for a single-story house; 4–6 weeks for two-story and hillside houses. One fixed written price after a free on-site estimate.
Licensed general contractor, CSLB #1021284, licensed since 2016, 5.0★ Google (45 reviews), 4.9★ Angi (103 reviews). Office in Valley Glen, about 35 minutes from Culver City. Planning ranges by tier and neighborhood are in the siding cost guide.
Right Image Builders is a licensed siding contractor serving Culver City: fiber cement (James Hardie and similar), three-coat re-stucco and stucco repair, engineered and natural wood, metal, and stucco-to-siding conversions, with the dry rot, flashing and window repairs behind the wall handled under the same contract. We build to the California Wildland-Urban Interface Code in the fire-hazard zones of Culver City. 10-year written workmanship warranty. Free on-site estimate: (818) 210-4544.
Siding in Culver City
at a Glance
Time on site
2–4 weeks for a single-story house; 4–6 weeks for two-story and hillside houses that need scaffolding on every elevation.
Permits
The City of Culver City Building Safety Division (own city, not LADBS); pulled, inspected and closed by us before the final payment.
Fire-hazard zone
Hillside parcels may be in a Very High Fire Hazard Severity Zone; checked per address.
Proof
Licensed general contractor, CSLB #1021284, own siding crew, 10-year written workmanship warranty, 5.0★ Google (45 reviews).
Who does the work
Our own crew, under one licensed general contractor (CSLB #1021284), on one permitted contract.
How we price
One fixed, written price after a free on-site visit; hidden conditions priced in writing before the crew continues; final payment after your walkthrough.
What Culver City Walls
Usually Need
The houses we re-side in Culver City are mostly 1920s–40s bungalows and 1950s ranches on 5,000–6,500 sq ft lots, hillside houses in Blair Hills. Around Carlson Park, Sunkist Park, Blair Hills and the streets around Veterans Park the walls tell the same story we see across the Westside: original stucco or wood from the first build, patched over the decades, with the weather barrier behind it long past its life.
On a 1950s ranch with original lap or board siding, fiber cement lap keeps the profile, takes paint and never feeds termites; it is what we install most. On a Craftsman or 1920s bungalow the clapboard profile is the house; fiber cement lap or engineered wood reproduces it, and the trim and water table are rebuilt rather than covered. Hillside and canyon houses add scaffolding on every elevation and, in the fire zone, a noncombustible exterior: fiber cement, metal panels or three-coat stucco.
Either way the sequence does not change: tear-off to the sheathing, dry-rot and framing repair priced in writing, a new weather-resistive barrier with flashing at every window, deck ledger and corner, then the siding or lath. Culver City is 35 minutes from our Valley Glen office, so the same crew that measures the house builds it.
How We Price a Siding replacement
in Culver City
Every siding replacement in Culver City gets one fixed, written price after a free on-site visit: we measure the house, check what the City of Culver City Building Safety Division requires for the lot and price the whole scope before you sign anything.
What moves the number is the scope you choose, the condition we find behind the walls and the finish level, never a surprise invoice: anything we uncover during the work is priced in writing before the crew continues, and the final payment comes after your walkthrough.
Setting a budget first? The siding cost guide shows the current planning ranges by tier and neighborhood.
Permits and the Fire Code
in Culver City
Siding in Culver City is permitted by City of Culver City Building Safety Division, 9770 Culver Blvd, not LADBS: Culver City issues the permit at its Building Safety counter and inspects the flashing before the finish goes on. A like-for-like re-side or re-stucco is usually a straightforward permit; a conversion or structural repair is an alteration permit. We pull it, schedule the inspections and close it before the final payment.
Parts of Culver City — the hillside and canyon streets — fall inside a mapped Very High Fire Hazard Severity Zone, where the 2025 California Wildland-Urban Interface Code applies to a re-side: a noncombustible wall covering such as fiber cement, metal or three-coat stucco, or fire-retardant-treated wood, with ember-resistant vents and listed eave and wall-base details. We check your parcel on the CAL FIRE and local fire-zone maps before the material is chosen; on the flats the standard rules apply.
Sources: 2025 California Wildland-Urban Interface Code (Title 24, Part 7), effective January 1, 2026, which replaced Chapter 7A; applies to alterations and repairs in Fire Hazard Severity Zones; coatings are not an approved method of protection (read); CAL FIRE Office of the State Fire Marshal: Fire Hazard Severity Zone maps and the Wildland-Urban Interface building materials listing (maps).
Every Siding Service,
One Licensed Crew
Full siding replacement
Tear-off, dry-rot and sheathing repair, new weather-resistive barrier, flashing at every window, door, deck ledger and corner, new siding, trim and caulking, ready for paint.
Siding and stucco repair
Cracked stucco, soft boards, termite and woodpecker damage, rot at the base of a wall, failed caulking: matched, flashed and finished so the repair disappears.
Re-stucco and re-coat
Three-coat re-stucco over new paper and lath, one-coat systems, or a patch-and-re-coat with a new color or elastomeric finish; smooth and textured.
Conversions
Stucco to fiber cement or wood siding, or siding to stucco, with the flashing and structural details each direction needs, permitted as an alteration.
Fire-zone exteriors
Noncombustible fiber cement, metal or three-coat stucco, or treated wood, with ember-resistant vents, built to the 2025 California Wildland-Urban Interface Code where Culver City parcels fall inside a fire-hazard zone.
What is behind the wall
The rotted stud, the failed window flashing or the deck ledger we uncover is repaired under the same contract and permit, not referred out.
Three Steps.
Zero Surprises.
Free Exterior Assessment
We walk every elevation, probe for rot and check the barrier, flashing and weep screed, and tell you honestly what the wall needs.
Fixed-Price Proposal
An itemized fixed price by elevation and material within 3–5 business days; hidden rot found at tear-off is priced in writing before the crew continues.
Install, Inspect, Warrant
Our own crew, a closed permit, and a 10-year written workmanship warranty at completion.
Free Siding Estimate
in Culver City
Tell us about the house and what you are seeing on the walls; a senior member of our team will reach out within 4 business hours to schedule the on-site assessment in Culver City.
Prefer to talk it through?
(818) 210-4544Questions Culver City Homeowners
Ask About Siding
Yes. Our own crew installs fiber cement, engineered and natural wood, metal and vinyl, and does stucco from a patch-and-re-coat to a full three-coat re-stucco, plus stucco-to-siding and siding-to-stucco conversions. In Culver City that matters because so many houses mix the two, stucco below with wood or board-and-batten above, and the flashing between them is where the leaks start.
We do, through the City of Culver City Building Safety Division (own city, not LADBS). A straightforward re-side or re-stucco is a simple permit; a conversion or a wall with framing repair is an alteration permit with an inspection before the finish goes on. The permit is closed before your final payment.
Two to four weeks on site for a typical single-story Culver City house: a few days of tear-off and repair, a few days for barrier and flashing, then the siding or the stucco coats, which need their cure time between coats. Two-story and hillside houses run four to six weeks because every elevation is scaffolded; our Calabasas project ran six.
Four things: an active CSLB license you can verify online (ours is #1021284, General Building B), proof of liability and workers' compensation insurance, a written workmanship warranty with a term on it (ours is ten years), and a written scope that names the weather barrier, the flashing and who pulls the permit. If a bid in Culver City does not mention the barrier, it is a bid to cover the problem, not fix it.
A fixed price, in writing, after the free on-site visit, not a running estimate. The scope is itemized line by line, the City of Culver City Building Safety Division permit and inspections are inside it, and hidden conditions found during a Culver City job are priced in writing before any further work. For budget planning before the visit, the siding cost guide shows the current ranges.
Siding Replacement — All of LA
Every material, 2026 cost ranges →
MaterialFiber Cement Siding
Hardie lap and panel →
MaterialStucco: Re-Stucco and Repair
Re-coat, three-coat, conversions →
ServiceSiding and Stucco Repair
Rot, cracks, flashing →
ProjectCalabasas Fiber Cement Re-Side
A hillside job, photo by photo →
GuideSiding in a Fire Zone
The WUI code, material by material →
NearbySiding Contractor in Santa Monica
Nearby neighborhood →
NearbySiding Contractor in Beverly Hills
Nearby neighborhood →
NearbySiding Contractor in West Hollywood
Nearby neighborhood →
Planning GuideHardie vs. SmartSide vs. Vinyl (2026)
Which product for your house →