Siding Contractor
in Sherman Oaks, CA
Done Right, Once.
Fiber cement, stucco, wood and metal on Sherman Oaks houses, replaced or repaired by our own crew with the weather barrier and flashing done properly, the permit pulled through LADBS, and a 10-year workmanship warranty in writing.
Siding Contractor in Sherman Oaks, CA: Right Image Builders (CSLB #1021284) replaces and repairs siding and stucco for 1940s–60s ranch and mid-century homes on the flats, post-and-beam and hillside houses south of Ventura across Chandler Estates, Sherman Village and Longridge Estates, with its own crew and permits through LADBS, City of Los Angeles, with Baseline Hillside Ordinance review south of Ventura Boulevard. 2–4 weeks on site for a single-story house; 4–6 weeks for two-story and hillside houses. One fixed written price after a free on-site estimate.
Licensed general contractor, CSLB #1021284, licensed since 2016, 5.0★ Google (45 reviews), 4.9★ Angi (103 reviews). Office in Valley Glen, about 10 minutes from Sherman Oaks. Planning ranges by tier and neighborhood are in the siding cost guide.
Right Image Builders is a licensed siding contractor serving Sherman Oaks: fiber cement (James Hardie and similar), three-coat re-stucco and stucco repair, engineered and natural wood, metal, and stucco-to-siding conversions, with the dry rot, flashing and window repairs behind the wall handled under the same contract. We build to the California Wildland-Urban Interface Code in the fire-hazard zones of Sherman Oaks. 10-year written workmanship warranty. Free on-site estimate: (818) 210-4544.
Siding in Sherman Oaks
at a Glance
Time on site
2–4 weeks for a single-story house; 4–6 weeks for two-story and hillside houses that need scaffolding on every elevation.
Permits
LADBS, City of Los Angeles, with Baseline Hillside Ordinance review south of Ventura Boulevard; pulled, inspected and closed by us before the final payment.
Fire-hazard zone
Hillside parcels may be in a Very High Fire Hazard Severity Zone; checked per address.
Proof
Licensed general contractor, CSLB #1021284, own siding crew, 10-year written workmanship warranty, 5.0★ Google (45 reviews).
Who does the work
Our own crew, under one licensed general contractor (CSLB #1021284), on one permitted contract.
How we price
One fixed, written price after a free on-site visit; hidden conditions priced in writing before the crew continues; final payment after your walkthrough.
What Sherman Oaks Walls
Usually Need
The houses we re-side in Sherman Oaks are mostly 1940s–60s ranch and mid-century homes on the flats, post-and-beam and hillside houses south of Ventura. Around Chandler Estates, Sherman Village, Longridge Estates and the hills south of Ventura the walls tell the same story we see across the San Fernando Valley: original stucco or wood from the first build, patched over the decades, with the weather barrier behind it long past its life.
On a 1950s ranch with original lap or board siding, fiber cement lap keeps the profile, takes paint and never feeds termites; it is what we install most. Hillside and canyon houses add scaffolding on every elevation and, in the fire zone, a noncombustible exterior: fiber cement, metal panels or three-coat stucco.
Either way the sequence does not change: tear-off to the sheathing, dry-rot and framing repair priced in writing, a new weather-resistive barrier with flashing at every window, deck ledger and corner, then the siding or lath. Sherman Oaks is 10 minutes from our Valley Glen office, so the same crew that measures the house builds it.
How We Price a Siding replacement
in Sherman Oaks
Every siding replacement in Sherman Oaks gets one fixed, written price after a free on-site visit: we measure the house, check what LADBS requires for the lot and price the whole scope before you sign anything.
What moves the number is the scope you choose, the condition we find behind the walls and the finish level, never a surprise invoice: anything we uncover during the work is priced in writing before the crew continues, and the final payment comes after your walkthrough.
Setting a budget first? The siding cost guide shows the current planning ranges by tier and neighborhood.
Permits and the Fire Code
in Sherman Oaks
Siding in Sherman Oaks is permitted through LADBS (City of Los Angeles) at the Van Nuys Development Services Center, 6262 Van Nuys Blvd. For a re-side over solid sheathing or a re-stucco, LADBS issues an express permit under Information Bulletin P/GI 2020-003, so the paperwork is a counter visit, not a plan check; a stucco-to-siding conversion or any wall that needs framing repair is still a simple alteration permit. We pull it, schedule the inspection and close it before the final payment.
Parts of Sherman Oaks — the hillside and canyon streets — fall inside a mapped Very High Fire Hazard Severity Zone, where the 2025 California Wildland-Urban Interface Code applies to a re-side: a noncombustible wall covering such as fiber cement, metal or three-coat stucco, or fire-retardant-treated wood, with ember-resistant vents and listed eave and wall-base details. We check your parcel on the CAL FIRE and local fire-zone maps before the material is chosen; on the flats the standard rules apply.
Sources: 2025 California Wildland-Urban Interface Code (Title 24, Part 7), effective January 1, 2026, which replaced Chapter 7A; applies to alterations and repairs in Fire Hazard Severity Zones; coatings are not an approved method of protection (read); CAL FIRE Office of the State Fire Marshal: Fire Hazard Severity Zone maps and the Wildland-Urban Interface building materials listing (maps); LADBS Information Bulletin P/GI 2020-003 (bulletin).
Every Siding Service,
One Licensed Crew
Full siding replacement
Tear-off, dry-rot and sheathing repair, new weather-resistive barrier, flashing at every window, door, deck ledger and corner, new siding, trim and caulking, ready for paint.
Siding and stucco repair
Cracked stucco, soft boards, termite and woodpecker damage, rot at the base of a wall, failed caulking: matched, flashed and finished so the repair disappears.
Re-stucco and re-coat
Three-coat re-stucco over new paper and lath, one-coat systems, or a patch-and-re-coat with a new color or elastomeric finish; smooth and textured.
Conversions
Stucco to fiber cement or wood siding, or siding to stucco, with the flashing and structural details each direction needs, permitted as an alteration.
Fire-zone exteriors
Noncombustible fiber cement, metal or three-coat stucco, or treated wood, with ember-resistant vents, built to the 2025 California Wildland-Urban Interface Code where Sherman Oaks parcels fall inside a fire-hazard zone.
What is behind the wall
The rotted stud, the failed window flashing or the deck ledger we uncover is repaired under the same contract and permit, not referred out.
Three Steps.
Zero Surprises.
Free Exterior Assessment
We walk every elevation, probe for rot and check the barrier, flashing and weep screed, and tell you honestly what the wall needs.
Fixed-Price Proposal
An itemized fixed price by elevation and material within 3–5 business days; hidden rot found at tear-off is priced in writing before the crew continues.
Install, Inspect, Warrant
Our own crew, a closed permit, and a 10-year written workmanship warranty at completion.
Free Siding Estimate
in Sherman Oaks
Tell us about the house and what you are seeing on the walls; a senior member of our team will reach out within 4 business hours to schedule the on-site assessment in Sherman Oaks.
Prefer to talk it through?
(818) 210-4544Questions Sherman Oaks Homeowners
Ask About Siding
Yes. Our own crew installs fiber cement, engineered and natural wood, metal and vinyl, and does stucco from a patch-and-re-coat to a full three-coat re-stucco, plus stucco-to-siding and siding-to-stucco conversions. In Sherman Oaks that matters because so many houses mix the two, stucco below with wood or board-and-batten above, and the flashing between them is where the leaks start.
We do, through LADBS, City of Los Angeles, with Baseline Hillside Ordinance review south of Ventura Boulevard. A straightforward re-side or re-stucco is a simple permit; a conversion or a wall with framing repair is an alteration permit with an inspection before the finish goes on. The permit is closed before your final payment.
Two to four weeks on site for a typical single-story Sherman Oaks house: a few days of tear-off and repair, a few days for barrier and flashing, then the siding or the stucco coats, which need their cure time between coats. Two-story and hillside houses run four to six weeks because every elevation is scaffolded; our Calabasas project ran six.
Four things: an active CSLB license you can verify online (ours is #1021284, General Building B), proof of liability and workers' compensation insurance, a written workmanship warranty with a term on it (ours is ten years), and a written scope that names the weather barrier, the flashing and who pulls the permit. If a bid in Sherman Oaks does not mention the barrier, it is a bid to cover the problem, not fix it.
Three things: the scope you choose, the condition of the house once we open it up, and the finish level. Each is settled in writing, first in the fixed price after the free on-site visit, then in a written change order if a Sherman Oaks house hides something, so the number never moves without your signature; LADBS requirements are built in. Planning ranges by tier are in the siding cost guide.
Siding Replacement — All of LA
Every material, 2026 cost ranges →
MaterialFiber Cement Siding
Hardie lap and panel →
MaterialStucco: Re-Stucco and Repair
Re-coat, three-coat, conversions →
ServiceSiding and Stucco Repair
Rot, cracks, flashing →
ProjectCalabasas Fiber Cement Re-Side
A hillside job, photo by photo →
GuideSiding in a Fire Zone
The WUI code, material by material →
Same CityKitchen Remodeling in Sherman Oaks
Cabinets, islands, 2026 cost →
Same CityBathroom Remodeling in Sherman Oaks
Walk-in showers, tub-to-shower →
Same CityADU Builder in Sherman Oaks
Garage conversions, detached ADUs →
Same CityRoom Addition Contractor in Sherman Oaks
Additions and second stories →
NearbySiding Contractor in Studio City
Nearby neighborhood →
NearbySiding Contractor in Encino
Nearby neighborhood →
NearbySiding Contractor in Van Nuys
Nearby neighborhood →
Planning GuideHardie vs. SmartSide vs. Vinyl (2026)
Which product for your house →